Our Partners

Nitto Kohki
Vessel
Tone
Kuken
Ohtake
Meiji
Togawa
Yokohama
Triens
Convum
DLA
Nakatomi
Products

    Hose Reel Balancers

    Functions both as balancer and hose reel Features 1. Increases Operator Productivity and Reduces Fatigue 2. 360 degree Rotary Hook 3. Self lubricating bushings 4. Stainless steel wire cable will not shed with wear

    Open E-Catalog

    Impact Sockets

    Features 1. Better durability 2. Stable and easy to organize with every socket's position is fixed 3. Better appearance and anti-rust 4. Lightweight with optimized body's diameter

    Open E-Catalog

     

    Tool Quick Changers

    Tool Quick Changers Features 1. Easy replacement of the EOAT on the robot 2. Suitable also with vacuum ports 3. Avoids mistakes in pneumatic and electrical connections

    Open E-Catalog

    4mm Wing Shank

    • For fastening small screws for watches glasses and camera.
    • l Bit tip high-precision-machined to thread standards.

    Open E-Catalog

    Socket Wrench Sets

    Wedge type ultra small highly durable ratchet head with 72-tooth gear

    Open E-Catalog

    Clean Walker

    Clean Walker (Re-Usable Sticky Mat)
    • Film free adhesive mat
    • Soft and thick polyurethane gel mat effectively collects dust particles.

    Open E-Catalog

    Purge Adapter

    Residual Pressure Purge Adaptor for hydraulic lines
    • Couplings can be connected smoothly
    • Slim and neat piping with an in-line design

    Open E-Catalog

    Burr Cutter

    For deburring machined holes
      • A compact handy tool to remove burr of various
     
      types of material quickly and safely.
    • Holes of die cast products. Holes of plasma cut products.
    • Punched holes on metal sheet
    • Deburr and boring at the same time
    • Quick Connect holder for 3 sizes of cutter shank
    • Deburring can be done in safer and quicker.
    • Whole the operation process will be greatly shortened
    • Increased productivity

    Open E-Catalog

    Thrust-Cut Nipper

    Thrust Cut Air Nipper
    • These nippers are equipped with a foot switch and are linked to high precision drivers enabling the cutting of film shaped gates from the thin end, preventing wrinkles around the cut.
    Thrust Cut Air Nipper Blades
    • This is a dedicated set of blades for GT-NK 10. Suitable for processing of film gates attached to robot hands.
    Timing Controller
    • Connected between the compressor and the air nippers.
    • The timing controller enables adjustments to the slide and cutting timing (Approximately 0.5 seconds to 1.5 Seconds).

    Open E-Catalog

    Impact Drivers

    Impact Drivers - Fastening Tools Features
    • For Varous type of screws
    • Aluminium window sash
    Features 1. Suitable for various types of screws 2. Aluminum window sash 3. Furniture and other wooden applications 4. Assembly for motorbikes and light vehicles

    Open E-Catalog

    Mold Coupler

    Designed for quick replacement for die and mold! Rust resistant models having many variations.
    • Space saving design for molds with closely spaced coolant ports.
    • Push to connect design. Built in automatic shut-off valve in the socket.

    Open E-Catalog

    Anti-static mat

    Conductive Rubber Mat Controlling electroconductivity to 106 or more 107 or less without influence from the working environment ideal for workbenches requiring static electricity measures on backing

    Open E-Catalog

    Torx Bit

    For TORX screws popular in the automobile industries Features 1. For Torx screws popular in the automobile industry 2. With a round hole for tamper-proof 3. Torx has higher drive effectiveness and transfers torque smoothly and acculately while eliminating

    Open E-Catalog

    Vacuum Pump

    Linear Motor Driven Free Piston System Hand Vacuum Tweezers One touch suck and release action for easy transfer of miniature components! Most suitable for handling electronic parts such as ICs and LSIs. Precise micro parts such as watches, jewellery, other small parts and chemicals. Miniature Air Compressors & Vacuum Pumps Linear Motor Driven Free Piston System
    • Its Supports a wide variety of vacuum & compressor use
    • Longer durability
    Piezoelectric Bimor Pump Suitable for pumping both liquids and gases! As the Bimorph also acts as a diaphragm it has no motors or shafts or other troublesome mechanisms and thus minimal vibrations and fewer breakdowns. The Bimor is lighter, quieter and more durable than traditional pumps. It achieve maintenance free continuous operation for 60 months.

    Open E-Catalog

    Pneumatic Saw

    Special double-piston system achieved low vibration while cutting speed improved
    • Low vibration is achieved by the special design of double piston mechanism
    • New adoption of piston rings minimized power loss and improved cutting efficiency
    • Optimized blade stroke for maximum cutting performance
    • Rear exhaust system for chip-scattering-free operation

    Open E-Catalog

    Spanners, Wreches & Pliers

    A good design award winning prize product adoption Features 1. Easy to switch reverse and forward direction with finger. Matt finished, thin ratchet head 2. Head can be fixed with 15 degree, best tool for work in where no tools can reach so far 3. No need for inserting and removing wrench, possible for fast turning 4. Pliers is used for grabbing objects, turning pipes, cutting etc.. 5. The grip handle made by soft material, makes your hand suitable 6. Self-lock function makes it possible to hold objects firmly by holding it lightly

    Open E-Catalog

    Mini Coupler

    Exclusively for oxyacetylene equipment Many variations with higher flow rates!
    • From cylinders to torches, all piping connections associated with welding and cutting equipment are push-to-connect operations.
    • Double-lip seal prevents minor leak during connection. Oxygen and fuel gas Cuplas have different sizes to prevent accidental interconnection. Plugs with backflow stop valve in Mini Cupla are designed for gas welding/cutting to prevent occurrence of gas mixing.
    • Pressure loss is minimized to achieve higher flow rate.
    • Various types of end configurations have been standardized to comply with a wide range of welding and cutting equipment applications.

    Open E-Catalog

    Conductive Air Hose- UB-Easy

    • As a conductive sleeve is applied around the outer layer the grounding can be completed just by tightening the metallic joint (when the resistance value is 9 x 106Ω less, and the whole length is 15m or less).
    • A versale conductive air hose is now available!
    Open E-Catalog

    Super Coupler

    The lightweight design makes the Cupla best suited to power tools! Push-to-connect for easy operation

    Open E-Catalog

    Open End Spanner

    Open End Spanner Version upto 75Nm
    • Specialized for tightening flare joints/nut on air conditioner units.
    • Preset torque for flare joints/nuts.
    • On reaching preset torque, the wrench makes a clicking sound as well as a light retroaction.
    • Repeated Accuracy: ± 4%

    Open E-Catalog

    Square Nippers

    VESSEL provides a generous selection of blades for all wire cutting needs, including resin products gate cut and automatic welding equipment.
    • The position of air intake port is 180-degree rotatable.
    • Two air intake ports are provided, so they can be switched depending on the mounting place.

    Open E-Catalog

    Ratchet Wrench

    For fastening work at narrow place
    • Compact Size and lightweight
    • Five times working efficiency comparing manual work
    Features 1. Efficient for narrow spaces 2. Efficient to fast screws smaller than 10mm 3. Reduced reaction force

    Open E-Catalog

    Fan Ionizers

      For wider and far reach static erasing area
    • High Speed
    • Install anywhere
    • Butterfly Louvers
    • AC corona discharge method
    • Compact and light weight
    • Safe design
    • Easy Maintenance

    Open E-Catalog

    10000
    SKU's
    500
    Satisfied Clients
    10
    Global Brands
    20
    Years of Operation