Showing 1–12 of 41 results

Show sidebar
Close

Angle Die Grinder

High efficiency stands out as you continue to use. High rotation speed and minimum core deviation, realizing an effortless and smooth grinding performance.

Open E-Catalog

Close

Square Nippers

VESSEL provides a generous selection of blades for all wire cutting needs, including resin products gate cut and automatic welding equipment.
  • The position of air intake port is 180-degree rotatable.
  • Two air intake ports are provided, so they can be switched depending on the mounting place.

Open E-Catalog

Close

Round Nippers

  • The position of air intake port is 180-degree rotatable.
  • Two air intake ports are provided, so they can be switched depending on the mounting place.
  • These are fixing hardware for sprue cutting of direct gates or mounting to an automatic machine.
  • This unit is to be used in case the originally required pressure is not obtainable by the limit of space and air pressure.
  • The main unit is variable: the angle can be easily adjusted 0 to 600

Open E-Catalog

Close

Sliding Nippers

Sliding Air Nippers Horizontal- Type AIR NIPPERS
  • Vessel’s patented. V-groove slide base ensures constant stable positioning. The unit is not subject to inclined loads and has achieved high precision gate cutting performance.
Double Action Sliding Air Nippers
  • The springless slide construction and a main unit ensures smooth movement and a V groove slide base has been employed for high precision positioning.
Type-F Air Nippers
  • These compact. lightweight nippers have been designed for easy mounting inside equipment and to enable secure mounting under high ensity mounting conditions.
Slide-Off Air Nippers Vertical - type
  • Blade  gape  is  adjustable,  and fine adjustments are to make after  mounting  the  nippers, ensuring  clean,  unblemished cut surfaces.

Open E-Catalog

  Slide-Off Air Nippers Vertical - type Blade gape is adjustable, and fine adjustments are to make after mounting the nippers, ensuring clean, unblemished cut surfaces

Open E-Catalog

Close

Nipper Blades

Slide-off Air Nipper Horizontal - Type Blades
  • AJ/This is a vertical set of blade an unbeveled cutting edge. You can apply it at a right angle to the gate.
  • RAJ/ This is a reverse bevel of AJ type.

Open E-Catalog

Close

Thrust-Cut Nipper

Thrust Cut Air Nipper
  • These nippers are equipped with a foot switch and are linked to high precision drivers enabling the cutting of film shaped gates from the thin end, preventing wrinkles around the cut.
Thrust Cut Air Nipper Blades
  • This is a dedicated set of blades for GT-NK 10. Suitable for processing of film gates attached to robot hands.
Timing Controller
  • Connected between the compressor and the air nippers.
  • The timing controller enables adjustments to the slide and cutting timing (Approximately 0.5 seconds to 1.5 Seconds).

Open E-Catalog

Close

Air Scissors

  • Blade opening and closing is air piston driven.
  • Having no spring mechanism in the main unit facilitates maintenance operations

Open E-Catalog

Close

Double Action Air Scissors

  • Blade opening and closing is driven by air piston.
  • Having no spring mechanism in the main unit facilitates maintenance.
  • Optional blade No.HW1J
  • Open E-Catalog

Close

Hand Held Nipper

  • For cutting or crimping of resin or metals
  • VESSEL's made-to-order blades provide solutions for a virtually unlimited range of needs, leading to safer and more efficient working conditions, and less fatigue for the operator

Open E-Catalog

Close

Slide-Off Nipper Bracket Type

  • For cutting or crimping of resin or metals
  • With a laterally facing blade for plastics mounted, this nipper is suitable for a gate cutting by inserting the body and place itself close to the gate in a difficult space for a nipper installation.
  • VESSEL has achieved smooth and continuous slide movement even for large diameter gate cuts, which produces a large shock at each cut

Open E-Catalog

Close

Air Hydro Nipper

  • Requires Hydro Controller additionally Custom made blade lengths and cylinder capacities available Includes heater, temperature sensor.
  • Air – hydro cylinders produce high power from air and oil.
  • These units are ideal for high precision cuts required for products such as optical resin lenses.
  • Cutting transparent resin by thermal force without cracks or whitening

Open E-Catalog

Close

Servo Heat Nipper

  • Cutting transparent resin by thermal force without cracks or whitening
  • Blade travel distance and speed can be easily programmed.
  • Servo motor control enables delicate blade feeding and quiet gate cutting performance.

Open E-Catalog